Adjusting The Image Density - Ricoh AP2600N User Manual

E
Holding the grips of the toner car-
tridge, insert it into the printer
until it stops.
F
Push down the toner cartridge to
settle it in appropriate position.
G
Close the front cover.
Important
❒ Carefully close the front cover. If
you cannot close the cover easily,
pull the toner cartridge out of the
printer and insert it again. After
that, close the front cover again.
H
Turn on the power switch.
Cleaning and Adjusting the Printer

Adjusting the Image Density

You can adjust the image density
when the print side of the page is a
hazy gray or print image is too light.
Important
❒ Extreme settings may create print-
outs that appear dirty.
❒ Image density settings should be
made from the application or the
printer driver whenever possible.
A
Press { { { { Menu} } } } .
Menu
On Line
Job Reset Escape
Form Feed Enter
Power Error
"Menu" appears on the panel dis-
play.
B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the
"Maintenance" menu, and then
press { { { { Enter #} } } } .
Menu
On Line
Job Reset Escape
Form Feed Enter
Power Error
The following message appears on
the panel display.
Maintenance:
Image Density
5
Data In
Data In
95