Setting Up The Printer Driver - Ricoh AP2600N User Manual

Setting Up the Printer Driver

The following procedure allows you to configure the printer port to use Port-
Navi.
Preparation
The target printer must be turned on before starting the installation process.
A
Install the printer driver of the printer you want to use.
B
From the [Printers] window, click the icon of the printer. On the [File] menu,
click [Properties].
C
Click the [Details] tab and click [Add Port].
D
Click [Other], click [PortNavi] from the list and then click [OK].
The [Select Printer] dialog box appears .
The displayed items are as follows:
Model Name: The model name of the printer.
Name: The name of the Network Interface Board.
Comment: Additional information about the Network Interface Board.
Address: The IP address of the printer.
E
Click the model name of the printer, and then click [OK].
Note
❒ If you want to select any printer which is not shown here, click [IP Address]
and input the IP address of the printer.
F
Confirm that the PortNavi port name is shown in the [Print to the following
port] box, and click [OK].
The PortNavi port name is shown as "IP address@model name".
The configuration is now complete.
When printing, select the configured printer here and print as usual. Printing
will be done automatically by PortNavi.
Using PortNavi
3
39