When Using The Nib Setup Tool; When Using Ipp With Multidirect Print - Ricoh AP2600N User Manual

Ricoh ap2600n: user guide
Hide thumbs Also See for AP2600N:
Table of Contents

Advertisement

Appendix
Additional information
• When you click [Active Lease] on the [Scope] menu of DHCP manager, a list of
client leases appears. When the reserved IP address is not active, the name of
the reservation is the name entered in the Client Name field of the Add Re-
served Clients dialog box. When the reserved IP address becomes active, the
client name changes to the printer name configured by the Network Interface
Board. Only the first 13 letters of the printer name appear here. When you use
the printer with Multidirect Print, use the host name of the printer as the [Cli-
ent Properties] Client Properties dialog box.
• When the DHCP server does not assign an IP address, the Network Interface
Board uses 11.22.33.44 as a temporary IP address. You can confirm the print-
er's IP address on the network configuration page.
• Because 11.22.33.44 is a special IP address, you cannot print using this address.
• When using the DHCP relay agent in a network environment that uses a dial
up router to connect to the Network Interface Board, an increase in commu-
nication fees can occur.

When Using the NIB Setup Tool

6
If the Network Interface Board cannot browse using the TCP/IP protocol, con-
firm that the TCP/IP environment is correctly configured in your computer.

When Using IPP with Multidirect Print

When using IPP with Multidirect Print, note the following:
• The network printer can only receive one print job from Multidirect Print at a
time. While the network printer is printing a job, another user cannot access
the network printer until it completes the job. In this case, Multidirect Print
tries to access the network printer until the retry interval expires.
• If Multidirect Print cannot access the network printer and times out, Multidi-
rect Print stops sending the print job. In this case, you should cancel the paused
status from the print queue window. Multidirect Print will resume access the
network printer. You can delete the print job from the print queue window, but
canceling a print job that has been printed by the network printer might cause
that the next print job sent from another user not to be printed correctly.
• If a print job that is sent from Multidirect Print is interrupted and the network
printer cancels the job because something went wrong, launch the print job again.
• Print jobs sent from another computer do not appear in the print queue win-
dow regardless of the protocol.
• If various users send print jobs using Multidirect Print to network printers,
the printing order might not be the order in which the jobs were sent.
• An IP address cannot be used for the IPP port name because the IP address is
used for the PortNavi port name.
98

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap2600

Table of Contents