Installing Hard Disk Drive Type 2600 - Ricoh AP2600N User Manual

Installing Options
N
Plug the printer's power cord
back into the wall outlet and turn
on the power switch.
O
Print a configuration page to con-
firm that the Memory Unit is
properly installed.
2
Important
If you use a Windows operating
system, you should set up the
Memory Unit with the printer
driver to make the printer recog-
nizes the installation. See a de-
scription of Windows 95/98/Me,
Windows 2000 and Windows NT
4.0 on P.43 "Installing the Printer
Driver and Software".
Note
After installing the last option that
you want, print a configuration
page to confirm the installation. If
the new device is listed in the col-
umn of configuration options, then
it has been properly installed. For
more information about printing a
configuration page, see "Printing a
Configuration Page" in the Printer
Reference provided as a PDF file
on the CD-ROM labeled "Operat-
ing Instructions".
24
Installing Hard Disk Drive Type
2600
Important
The Hard Disk Drive can be dam-
aged by small amount of static
electricity. You should touch some
metal to discharge static electricity.
A
Check the contents of the box for
the following items:
• Hard Disk Drive
• Installation Guide
B
Be sure to check the following
points:
• The power switch is turned off.
• The power cord is unplugged
from the wall outlet.
• The interface cable is un-
plugged from the printer.
C
Use a coin to remove the two
screws, and then remove the cov-
er.
Note
The screws and cover are not
need when installing the Hard
Disk Drive.
ZCEX350J.eps