Ricoh AP2600N User Manual page 51

B Press { { { { Enter #} } } } .
The current IP address appears
on the panel display.
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to enter the
leftmost entry field of the IP
address.
D Press { { { { Enter #} } } } .
The pointer (k) moves to the
next entry field automatically.
k
Note
You can return the pointer
(k) to the previous (left) entry
field by pressing {Escape}.
If you press {Escape} when
the pointer (k) is on the left-
most position, the selected IP
address is reset.
E Repeat steps C C C C and D D D D to enter
the IP address.
Check if the pointer (k) is at the
rightmost position, and press
{Enter #} to register the IP ad-
dress you selected.
Configuring the Printer for the Network with the Operation Panel
H
If you use TCP/IP, you should as-
sign "Subnet Mask" and "Gate-
way Address" following the same
procedure for entering the IP ad-
dress.
I
If you use TCP/IP, set the "Access
Control" and "Access Mask" fol-
lowing the same procedure for
entering the IP address, if neces-
sary.
J
If you use TCP/IP, you can make
settings for "Network Boot".
You can select how to assign the
printer's address using the compu-
ter. Select one of the items below if
necessary.
• None (Default)
• DHCP
A Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Network Boot".
B Press { { { { Enter #} } } } .
The current setting appears on
the panel display.
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the
method you want to use.
D Press { { { { Enter #} } } } .
3
39