Ricoh AP2600N User Manual page 357

Ricoh ap2600n: user guide
Hide thumbs Also See for AP2600N:
Table of Contents

Advertisement

Message
Established SPX Connection with PServ-
er,(RPSocket=(socket number>), con-
nID=<connection ID>
Exit pserver
Frametype="frame type name"
httpd start.
inetd start.
ipp disable.
ipp enable
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
Login to fileserver "file server name"
("NDS|BINDERY")
multid start.
nbstart start. (NetBEUI)
NBT Registration Broadcast(<NetBIOS
name>)
nptd start.
NetBEUI Computer Name="computer name" The NetBEUI Computer Name is defined as
nmsd start. (NetBEUI)
npriter start. (NetWare)
nwstart start. (NetWare)
Open log file "file name"
papd start.
phy release file open failed.
Print queue "print queue name" cannot be ser-
viced by printer 0, "print server name"
Description and Solutions
(In remote printer mode) A connection with
the print server has been established.
(In print server mode) Exits the print server
because the necessary print server settings
have not been made.
The "frame type name" is configured to be
used on NetWare.
An httpd has started.
An inetd has started.
Printing with ipp is disabled.
Printing with ipp is enabled.
The resource lease time that was received from
the DHCP server is in seconds. The renewal
time is also in seconds.
(In print server mode) Logged in to the file
server with NDS or BINDERY mode.
Data transmission service for multiprotocols
has started.
The service for NetWare protocol stack setting
has started.
Use a local broadcast to map <NetBIOS
name> with the IP address.
A nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
"computer name".
A nmsd (Name Server Daemon) has started.
(In remote printer mode) NetWare service has
started in remote printer mode.
The service for NetWare protocol stack setting
has started.
(In print server mode) The specified log file
has been opened.
AppleTalk print service has started.
Replacing the Network Interface Board is re-
quired. Contact your sales or service represen-
tatives.
(In print server mode) The print queue name
cannot be serviced. Make sure that print queue
volume exists on the specified file server.
Message List
6
93

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap2600

Table of Contents