Ricoh AP2600N User Manual page 330

NetWare Configuration
D In the [Print Server Operation Mode] group, click [As Remote Printer].
E In the [Remote Printer No.] box, type the number of the printer.
Important
❒ Use the same number as that of the printer to be created in the print
server.
F Click [OK] to close the property sheet.
G After a confirmation dialog box appears, click [OK].
J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
K
From Windows, run NW Admin.
Reference
4
For more information about NWAdmin, see the documentation that comes
with the NetWare.
L
Create a print queue as follows.
A Select the container object the print queue is located in among those in
the directory tree, and click [Create] on the [Object] menu.
B In the [Class of new object] box, click "Print Queue", and click [OK].
C In the [Print Queue name] box, type the name of the print queue.
D In the [Print Queue Volume] box, click [Browse] button.
E In the [Available objects] box, click the volume in which the print queue is
created, and click [OK].
F After confirming the settings, click [Create].
M
Create a printer as follows.
A Select the container object the printer is located in, and click [Create] in
the [Object] menu.
B In the [Class of new object] box, click "Printer", and click [OK]. When you
are using NetWare 5, click "Printer (Non NDPS)".
C In the [Printer name] box, type the name of the printer.
D Click [Define additional properties] to check a box, and click [Create].
N
Assign print queues to the created printer as follows.
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step L L L L , and click
[OK].
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and click [OK].
E After confirming the settings, click [OK].
66