Ricoh AP2600N User Manual page 302

Windows NT 4.0 Configuration
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as "FILE", then delete it. For more information about PortNavi, see PortNavi
Help.
A
From the [Printers] window, click the icon of the printer which uses Port-
Navi to print. On the [File] menu, click [Properties].
B
Click the [Details] tab and confirm that the PortNavi port is shown in the
3
[Print to the following port] box.
Remember the port name because this port should be deleted later.
C
From the [Print to the following port] box, select [FILE].
D
Click [Apply].
The port which is currently in use is changed.
E
Click [Delete Port].
F
Click the PortNavi port name as confirmed in step B B B B , then click [OK].
The port is deleted.
G
Click [OK] to close the printer properties.
Uninstalling PortNavi
Preparation
Before uninstalling PortNavi, make sure that:
• The port settings dialog box is closed.
• No printer is using the PortNavi port as a printer port.
A
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
B
On the [Install/Uninstall] tab, click [PortNavi], and click [Add/Remove].
C
After a confirmation message appears, click [Yes].
UninstallShield removes all of the components of PortNavi.
D
After a confirmation message appears, click [Yes].
E
Confirm the [Remove Shared File?] dialog box.
F
When the uninstallation is complete, click [OK].
38