Setting Up A Client Computer - Ricoh AP2600N User Manual

Windows NT 4.0 Configuration

Setting up a Client Computer

This section describes the procedures for setting up a client in a network that uses
Windows 2000, Windows NT Server or Windows NT Workstation as a print server.
To print from Windows NT 4.0, you must install the printer driver and change
the printer port to the print server.
3
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000 or Windows NT print server. Do not begin the fol-
lowing procedure until the client has been set up and configured correctly.
Use the [Printers] window to set up the printer.
A
Click [Start], point to [Settings], and then click [Printers].
B
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
C
Click [Network printer server], and click [Next >].
D
In the [Shared Printers] box, double-click the name of the computer used as a
print server.
The printers attached to the network are displayed.
E
Click the printer you want to use, and click [OK].
Note
❒ If the printer driver is not installed in the print server, a message appears.
If a driver has been installed on the client, click [OK], and follow the in-
structions on the screen.
❒ There is a Windows NT printer driver on the CD-ROM that comes with the
printer.
46
Windows 2000 or
Windows NT Print Server
Windows NT 4.0