Ricoh AP2600N User Manual page 73

E
In the [Installable Options] group, select the option you have installed to the
printer.
The current setting appears in the [Change Setting] box.
F
Use the [Change Setting:] list to select the appropriate setting for the selected
option.
G
Repeat steps E E E E – F F F F for all options.
H
After making all option settings, click [OK].
- - The conditions of the bidirectional transmissions - -
When the bidirectional transmissions is enabled, the information about the pa-
per size and feed direction settings are automatically sent to the computer by the
printer. You can also confirm the printer's condition from your computer.
• The bidirectional transmissions is supported by Windows 95/98/Me, Win-
dows 2000 and Windows NT 4.0.
• When the bidirectional transmissions is enabled on Windows 95/98/Me, the
unavailable functions are grayed out in the [Change Accessories] dialog box of
the printer properties. The [Change Accessories] dialog box is displayed by
clicking the [Change Accessories...] button in the [Printer Configuration] dialog
box. On Windows 2000 and Windows NT 4.0, the [Change Accessories] tab
does not appear in the printer properties.
To support the bidirectional transmissions, the following conditions below are
required.
Connecting with the parallel interface cable and the USB exchange cable.
• The computer supports the bidirectional transmissions.
• The Interface cable supports the bidirectional transmissions.
• The printer is connected to the computer using the standard parallel inter-
face cable and the parallel connector.
• On Windows 95/98/Me, the [Enable bi-directional support for this printer] is se-
lected in the [Spool Settings...] on the [Details] tab.
• On Windows 2000 and Windows NT 4.0, the [Enable bi-directional support] is
selected and [Enable printer spooling] is not selected on the [port] tab.
Connecting with the network
• PortNavi or Multidirect Print and the TCP/IP protocol are used.
• On Windows 95/98/Me, the [Enable bi-directional support for this printer] is se-
lected in the [Spool Settings...] on the [Details] tab.
• On Windows 2000 and Windows NT 4.0, the [Enable bi-directional support] is
selected and [Enable printer spooling] is not selected on the [port] tab.
• PRINTER MANAGER FOR CLIENT included on the CD-ROM is installed.
Installing the PostScript Printer Driver
4
61