Ricoh AP2600N User Manual page 211

Memory Usage
Unit Of Measure
Edge Smoothing
Resolution
Toner Saving
You can select the volume of memory to be used from "Font Pri-
ority" or "Frame Priority", according to the paper size, resolution
or printer language.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This setting uses frame memory for high speed printing.
Note
❒ Default: Frame Priority
Reference
For more information, see P.139 "Memory Capacity and Paper
Size".
You can select "mm" or "inch" for the custom paper size.
You can set whether Edge Smoothing is enabled.
• On
• Off
Note
❒ Default: On
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
it is "On".
❒ "Edge Smoothing" is not effective when 1200 dpi resolution is
selected.
You can set the print resolution in dots per inch.
❖ ❖ ❖ ❖ PCL
300 dpi, 600 dpi
❖ ❖ ❖ ❖ PS
300 dpi, 600 dpi, 1200 dpi
Note
❒ Default: 600 dpi
You can select whether or not Toner Saving is enabled.
• On
• Off
Note
❒ Default: Off
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
it is "On".
System Menu
6
117