Ricoh AP2600N User Manual page 316

NetWare Configuration
F
Confirm that the MAC address and IPX address are correct, and click [Finish].
G
Type the print server name into the [Device Name] box, and click [Next >].
The default setting is "RDP_" followed by the 6 digit serial number. We rec-
ommend that you change it to something that is easier to remember or some-
thing based on the structure of the network.
H
In a dialog box for selecting a network environment, click to select the [Net-
Ware] check box and click to clear the [TCP/IP] check box.
I
Click [Next >].
A dialog box for configuring the NetWare environment appears.
J
Select [Bindery] when printing under Bindery mode, or select [NDS] when
4
printing under NDS mode.
When you are using NetWare version 4.x, you should select [NDS].
K
If you selected [Bindery], type into the [File Server Name:] box the name of the
file server in which a print server is to be created.
Clicking [Browse], you can select a file server among those listed in the
[Browse] dialog box.
L
If you selected [NDS], type into the [Tree:] box the name of the NDS tree in
which the print server is created, and type the context into the [Context:] box.
Clicking [Browse], you can select a NDS tree and a NDS context among those
listed in the [Browse] dialog boxes.
As a context, object names are typed from a lower object and divided by a pe-
riod. For example, if you want to create a print server into NET under DS,
type "NET.DS".
M
Click [Next >].
N
Type the name of the printer into the [Printer Name] box, and the name of the
print queue into the [Print Queue Name] box.
The default setting for Printer Name is "Print Server Name" followed by "_1"
and that for Print Queue Name is "Print Server Name" followed by "_Q"
(quotation marks are not included). You can change them if necessary.
O
If you have selected NDS mode, type the volume of the print queue into the
[Queue Volume] box.
Clicking [Browse], you can select one of those shown in the [Browse] dialog box.
52