Ricoh AP2600N User Manual page 4

Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes:
The actual names of the following applications do not appear on the following pages. Check the model
name of the printer before reading this manual.
Descriptions in this manual
Type 1 Printer
Type 2 Printer
Descriptions without the note for identifying the type of the printer are common for both models. Certain
types might not be available in some countries. For more information, please contact your local dealer.
The actual names of the following applications do not appear on the following pages. Confirm which
applications you will be using before reading this manual.
Descriptions in this manual
PRINTER MANAGER FOR ADMINISTRATOR
PRINTER MANAGER FOR CLIENT
Consumable:
Consumable
Toner
Consumable
MAINTENANCE KIT Type2600
Power Source
RICOH LASER AP2600: 120 V, 60 Hz, 8.4 A or more
RICOH LASER AP2600N: 120 V, 60 Hz, 8.4 A or more
Please be sure to connect the power cord to a power source as above.
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
Operator Safety:
This machine is considered a CDRH class I laser device, safe for office/ EDP use. The machine con-
tains 5-milliwatt, 760 - 800 nanometer wavelength, GaAIAs laser diode. Direct (or indirect reflected) eye
contact with the laser beam might cause serious eye damage. Safety precautions and interlock mech-
anisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and
laser subsystems to the factory or service depot when replacement or the optical subsystem is required.
Important
Parts of this manual are subject to change without prior notice. In no event will the company be liable
for direct, indirect, special, incidental, or consequential damages as a result of handling or operating
the machine.
Caution:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Do not attempt any maintenance or troubleshooting other than that mentioned in this manual. This printer
contains a laser beam generator and direct exposure to laser beams can cause permanent eye damage.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts in your Ricoh office product.
Model name
RICOH LASER AP2600
RICOH LASER AP2600N
Application
Aficio Manager for Admin
Aficio Manager for Client
Name
RICOH LP TONER CARTRIDGE Type
100 BLACK
Compornents
Friction Pads, Paper Feed Rollers,
Transfer Roller, Fusing Unit