Ricoh AP2600N User Manual page 383

Macintosh
A
From an application, select the menu command to print.
The print dialog box appears.
B
Click to select the [Job Log].
C
Select [Sample Print] and select the appropriate setting.
D
Enter the "User ID" in [User ID]. This can consist of up to eight alphanumer-
ic (a-z, A-Z, 0-9) characters.
Note
❒ This is used to identify the user associated with a job.
❒ The "User ID" can consist of up to eight alphanumeric (a-z, A-Z, 0-9) char-
acters.
E
After making all of the settings you want, click [Print].
The Sample Print job is sent to the machine and one printing set is printed.
F
Check the print job to confirm that the settings are all right.
If the settings are fine, go to step G to print the remaining print job.
If not, you can delete the saved job. ⇒ P.12 "Deleting a Sample Print file"
G
On the machine's operation panel, press { { { { Menu} } } } .
H
Press { { { { U U U U } } } } or { { { { T T T T } } } } until the following message appears on the panel display.
Menu:
Sample Print
I
Press { { { { Enter q q } } } } .
q q
The following message appears on the panel display.
Sample Print:
08:56 ABCD1234
J
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the file you want to print, and then press { { { { Enter q
K
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Print File", and then press { { { { Enter q
The following message appears on the panel display.
Qty: 1(1-999)
Press #To Print
Printing a Document
q } } } } .
q q
q } } } } . q q
11
1