Sample Print - Ricoh AP2600N User Manual

PostScript 3

Sample Print

Follow the procedures below to print a document using the "Sample Print"
function.
1
Windows 95/98/Me
Note
❒ If the application has a collate option, make sure that it is not selected before
sending a print job. By default, sample print jobs are automatically collated
by the printer driver. If a collate option is selected from the application print
dialog box, more printings than intended may be printed.
A
From an application, select the menu command to print.
The print dialog box appears.
B
Open the Printer Properties.
C
Click to select the [Job/Log] tab.
D
Select [Sample Print] in the [Setup].
E
Enter the "User ID" in [User ID]. This can consist of up to eight alphanumer-
ic (a-z, A-Z, 0-9) characters.
Note
❒ This is used to identify the user associated with a job.
❒ The "User ID" can consist of up to eight alphanumeric (a-z, A-Z, 0-9) char-
acters.
F
Click [OK].
G
Click [OK] to close the Printer Properties.
H
Start printing from the application's print dialog box.
The Sample Print job is sent to the machine and one printing set is printed.
I
Check the print job to confirm that the settings are all right.
If the settings are fine, go to step J to print the remaining print job.
If not, you can delete the saved job. ⇒ P.12 "Deleting a Sample Print file"
J
On the machine's operation panel, press { { { { Menu} } } } .
K
Press { { { { U U U U } } } } or { { { { T T T T } } } } until the following message appears on the panel display.
Menu:
Sample Print
8