Table of Contents
Advertisement
Appendix
Additional information
• When you click [Active Lease] on the [Scope] menu of DHCP manager, a list of
client leases appears. When the reserved IP address is not active, the name of
the reservation is the name entered in the Client Name field of the Add Re-
served Clients dialog box. When the reserved IP address becomes active, the
client name changes to the printer name configured by the Network Interface
Board. Only the first 13 letters of the printer name appear here. When you use
the printer with Multidirect Print, use the host name of the printer as the [Cli-
ent Properties] Client Properties dialog box.
• When the DHCP server does not assign an IP address, the Network Interface
Board uses 11.22.33.44 as a temporary IP address. You can confirm the print-
er's IP address on the network configuration page.
• Because 11.22.33.44 is a special IP address, you cannot print using this ad-
dress.
• When using the DHCP relay agent in a network environment that uses a dial
up router to connect to the Network Interface Board, an increase in commu-
nication fees can occur.
6
When Using the NIB Setup Tool
If the Network Interface Board cannot browse using the TCP/IP protocol, con-
firm that the TCP/IP environment is correctly configured in your computer.
When Using IPP with Multidirect Print
When using IPP with Multidirect Print, note the following:
• The network printer can only receive one print job from Multidirect Print at a
time. While the network printer is printing a job, another user cannot access
the network printer until it completes the job. In this case, Multidirect Print
tries to access the network printer until the retry interval expires.
• If Multidirect Print cannot access the network printer and times out, Multidi-
rect Print stops sending the print job. In this case, you should cancel the
paused status from the print queue window. Multidirect Print will resume ac-
cess the network printer. You can delete the print job from the print queue
window, but canceling a print job that has been printed by the network print-
er might cause that the next print job sent from another user not to be printed
correctly.
• If a print job that is sent from Multidirect Print is interrupted and the network
printer cancels the job because something went wrong, launch the print job
again.
• Print jobs sent from another computer do not appear in the print queue win-
dow regardless of the protocol.
102
Draft 2000/06/22
Advertisement
Chapters
Table of Contents
