Special Notes When Using External Options; Precautions For Using The Finisher; Removing Prints From Finisher/Booklet Finisher During Printing Or When In Standby State - Ricoh Pro C9500 Operator's Manual

Special Notes When Using External Options

For the product names of options, see page 11 "Abbreviated Names of Options".

Precautions for Using the Finisher

• The stapler may eject unfolded staples. Be careful not to prick your fingers.
• Do not hit the finisher (for instance, do not hit the surface of the finisher repeatedly to arrange stacks
of paper neatly).
• Remove printouts from the finisher by lifting them straightforwardly from the left side. If you remove
printouts at an angle or towards the front, the shift tray may rise and catch them.
Booklet finisher
• Finisher shift tray 1 or 2
Removing Prints from Finisher/Booklet Finisher during Printing or When in
Standby State
• Notes on removing paper from the shift tray
When removing the paper delivered to the shift tray, if you remove the paper at an angle or
towards the front of the machine, the shift tray may rise and catch on the paper. Press the
[Suspend / Resume] key before removing the paper.
• Removing paper during printing
When delivering paper to the shift tray with finisher or booklet finisher, the paper may be
misaligned depending on the type of printed image. If this happens, suspend printing, remove the
paper, and then resume printing.
Special Notes When Using External Options
D0CPIC1761
29