TCP/IP Network Requirements
This section provides a general description of ethernet networks, TCP/IP and
X.25 protocols and the requirements needed to support the operation of INM
Broadband.
Ethernet
The ethernet protocol is a standard defined by the Institute of Electrical and
Electronics Engineers (IEEE) for communication networks. The IEEE
standard 802.3 defines the layer 2 functionality in the protocol stack shown
below.
Figure 49. OSI 7 Layer Protocol Stack
7
6
5
4
3
2
1
The characteristics of a 10-Base-T Ethernet network are:
•
•
•
Table 46
INM Release 4.1 Planning Guide
Application
Presentation
Session
Transport
Network
Data Link
Physical
Maximum speed of 10 Mbits/sec
Maximum number of 100 Ethernet devices per network
Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
media access control
177 of 202
NM-00014(R5)
PG OC 98-13
Issue 1.2