Table of Contents
Advertisement
/cfg/l3/ospf/virt <link number>
OSPF Virtual Link Configuration
[OSPF Virtual Link 1
Table 6-76 OSPF Virtual Link Configuration Menu Options (/cfg/l3/ospf/virt)
Command Syntax and Usage
aindex <area index (0-2)>
Configures the OSPF area index.
hello <value (1-65535)>
Configures the authentication parameters of a hello packet, in seconds.
dead <value (1-65535)>
Configures the health parameters of a hello packet, in seconds. Default is 60 seconds.
trans <value (1-3600)>
Configures the delay in transit, in seconds. Default is one second.
retra <value (1-3600)>
Configures the retransmit interval, in seconds. Default is five seconds.
nbr <NBR router ID (IP address)>
Configures the router ID of the virtual neighbor. Default is 0.0.0.0.
key <password>
Configures the password (up to eight characters) for each virtual link. Default is none.
mdkey <key ID (1-255)>|none
Sets MD5 key ID for each virtual link. Default is none.
enable
Enables OSPF virtual link.
40M2420, April 2007
Menu]
aindex
- Set area index
hello
- Set hello interval in seconds
dead
- Set dead interval in seconds
trans
- Set transit delay in seconds
retra
- Set retransmit interval in seconds
nbr
- Set router ID of virtual neighbor
key
- Set authentication key
mdkey
- Set MD5 key ID
enable
- Enable interface
disable - Disable interface
delete
- Delete interface
cur
- Display current OSPF interface configuration
Alteon OS Command Reference
Chapter 6: The Configuration Menu
275
Advertisement
Table of Contents
