Table of Contents
Advertisement
Creating Alarm Lists/Histories
4-13-2
Modifying Alarm Lists/Histories
Procedure 1. Select "ALARM" on the initial editing screen.
7. Locate the cursor at the start point for the image & library data display area and
press the
key, then move the cursor to the end position and press the
key once more.
If "No" has been specified for "Dsp Image & Lib", nothing will be displayed.
"
8. The specified alarm list/history, image & library display area, and scroll keys
will be displayed.
If the "Dsp Image & Lib" set in the display settings is 1 to 3 lines, "up" and "down"
"
line scroll keys will be automatically displayed. If the "Dsp Image & Lib" set was
4 or more lines, "up" and "down" line scroll keys and a page scroll key will be
automatically displayed.
This is the procedure for changing the contents, display position, etc., of created
alarm lists and histories.
It is also possible to proceed straight to step 3. by left clicking on the alarm list/
"
history to be modified (see p.57).
2. Select the alarm list/history to be modified and press the
It is also possible to select the alarm list/history to be modified by left clicking on
"
it.
3. Select the required item and execute the modification.
Alarm list
S Set Display:
S Disp Position:
S Disp Pos Image & Lib: Select to change the display position of an image or
Alarm history
Used to modify the item specified in the window dur-
ing setting.
Select to change the display position of the alarm
list/history.
library data.
Section 4-13
key.
147
Advertisement
Table of Contents
