Table of Contents
Advertisement
Editing Screen Data
4-15 Editing Screen Data
Selecting the applicable screen data
Reference: Depending on the lamp status, which is determined by the setting for "Lamp/TSW
Procedure 1. Specify the start point of the area that is to encompass the object of the editing
Procedure 1. Specify the start point and end point of an area that contains some part of the
150
This section describes how to copy, move, and delete existing screen data.
Editing is executed in existing screen data units.
The method for specifying the object of the editing operation is set with "Edit way"
on the EDIT. The object of the editing operation is selected as follows.
Disp Mode" in the environmental settings, image/library lamps may not be dis-
played and it may not be possible to select them using the "EDIT".
S For "In frm" specifications
operation.
2. Set the end point at a diagonally opposite point chosen so that the object of the
editing operation is accommodated within the frame.
Start point
(
The object of the editing operation will be encompassed by a dotted line.
For copy and move operations, a frame the same size as the area enclosed by this
dotted line becomes a cursor and can be moved.
S For "On frm" specifications
object of the editing operation.
Start point
(
)
Object of the editing operation
Selection frame
End point
)
Selection frame
End point
Objects of the editing operation
Section 4-15
(
)
(
)
Advertisement
Table of Contents
