Table of Contents
Advertisement
Creating Alarm Lists/Histories
146
S Line Qty:
S Length:
S Dsp Image & Lib:
S Hist Info:
S Info Type:
S Details
S Scale:
S Smoothing:
S Color:
5. Press the
key with the cursor on "Exec".
6. A box indicating the size of the alarm list/history will be displayed.
Move this box to the required display position and press the
Specify the number of messages/history entries to
be displayed here.
The numbers of lines that can be displayed are as
follows:
NT30, NT30C: Max. 12 lines
NT612G:
Max. 16 lines
NT610C:
Max. 24 lines
Specify the number of displayed characters in one
message or history entry here. An area that will just
accommodate the specified number of digits will be
created.
When using an NT30 or NT30C, a maximum of 36
lines can be displayed, but this maximum may be
decreased depending on the display method and
history information display.
Specify whether or not images and library data cor-
responding to messages/histories are to be dis-
played here.
When an order of frequency is displayed, specify
whether or not the times of occurrence are also to
be displayed here. This setting is invalid with order
of frequency displays.
Specify one of the following formats for expressing
times of occurrence:
Y/M/D/ h : m:
Year/Month/Day Hour/Minute
(14 digits)
M/D h : m:
Month/Day Hour/Minute
(11 digits)
h : m:
Hour/Minute (5 digits)
Specify the display method for messages or history
entries here.
Specify the frame color, OFF/background color,
and ON color for the alarm list/history, and the dis-
play color and background color for image/library
data (NT30C and NT610C only). The display color
for image/library data is only valid for images dis-
played in the two-color mode.
Section 4-13
key.
Advertisement
Table of Contents
