Table of Contents
Advertisement
Creating Graphs
Reference: S If a broken line extends beyond the frame, only the part contained by the frame
S Ref Table:
S Points:
S 100% Val:
S 0% Val:
S −100% Val:
S Line:
S Color:
8. Press the
key with the cursor on "Exec".
9. The screen on which registration fields for broken line graphs can be selected
will be displayed.
To create another broken line graph, select a field.
Further broken lines can be added by repeating the operation from step 7.
To quit broken line graph creation, press the [Esc] key.
will be displayed, as shown below.
S Each time the [Tab] key is pressed, the graph display changes.
Specify the memory table number from which refer-
ence is to be started here.
Pressing the [F1] (Lst Slct) key allows the memory
table to be selected from a list.
Specify the number of vertices in the broken line.
The contents of a number of numeral tables equivalent
to this number and starting with the "reference start
table" will be displayed in the form of a broken line.
Specify the reference methods for 100%, 0%, and
−100% values. If "Num Table" is specified, specify the
numeral table number.
Pressing the [F1] (Lst Slct) key while "Num Table" is
specified allows the memory table to be selected from
a displayed list.
Specify the line type for the broken lines.
(Solid line, broken line, 1-dot chain, 2-dot chain)
Specify the display color for the broken lines (NT30C
and NT610C only).
Section 4-8
125
Advertisement
Table of Contents
