Table of Contents
Advertisement
Editing Screen Data
Batch Changing Colors (NT30C and NT60C only)
Procedure 1. Select "EDIT" from the initial editing menu.
Quitting Editing
Procedure 1. Press the [Esc] key while the editing menu is displayed.
Used to change the colors for specified data within a specified area in a batch.
2. Select "ColChg" from the editing menu.
3. Select the objects subject to the batch color change operation.
However, note that a specification to change to transparent color will be ig-
nored if it applies to a part of the image for which transparent color cannot be
used.
4. Specify the color change method and press the
5. Check the message and press the
To abort the batch color change, press the [Esc] key.
"
Select whether to quit after saving the result of editing or to quit without saving the
result of editing.
2. Check the message.
S Press the
key to quit after saving the result of editing.
S Press the [Space] key to quit without saving the result of editing (the status
before editing started will be re-established).
Section 4-15
key.
key.
157
Advertisement
Table of Contents
