Table of Contents
Advertisement
Marks
[Set]
[Clear]
[Inv.]
[Save]
Displaying Marks
[F5]
. . .
Set dots in a specified area
Used to set (display) all the dots within a specified area.
(1) Press the [F5] (Set) key.
(2) Specify the start point and end point of the area in which the dots are to be set.
Specify diagonally opposite points to specify a rectangular area.
(3) Press the
key: the dots inside the specified area will be set.
[F6]
. . .
Reset dots in a specified area
Used to reset (clear) all the dots within a specified area.
(1) Press the [F6] (Clear) key.
(2) Specify the start point and end point of the area in which the dots are to be
cleared.
Specify diagonally opposite points to specify a rectangular area.
(3) Press the
key: the dots inside the specified area will be cleared.
[F7]
. . .
Invert dots
Used to invert the display of all the dots within a specified area: displayed dots are
cleared and cleared dots are displayed.
(1) Press the [F7] (Inv.) key.
(2) Specify the start point and end point of the area in which the dots are to be
cleared.
Specify diagonally opposite points to specify a rectangular area.
(3) Press the
key: the dots inside the specified area will be inverted.
[F8]
. . .
Register a mark
Used to register a mark that has been created.
Marks can be displayed in either of the two following ways.
(1) Specification during character input
If the [F3] (Mark) key is pressed when inputting characters or a label, a mark can
be selected from the mark selection screen (only 16x16 dot marks can be se-
lected).
It is possible to use marks in combination with characters.
Mark data is displayed as data in the character input field. On the "Edit" screen, the
actual mark is displayed, taking the left bottom extremity of the mark as the origin.
(2) Specification from the Fixed Display Menu
On selecting "Mark" from the fixed display menu and specifying a size, a mark can
be selected from the mark selection screen.
For details on the operating procedure, see "Inputting Marks" (p.82).
Section 5-1
163
Advertisement
Table of Contents
