Table of Contents
Advertisement
Printing Data
6-1-3
Printing from the "Screen Selection" Screen
Procedure 1. Locate the bar cursor on the screen number whose data is to be printed.
180
Use the following method to specify printing from the "Screen Selection" screen.
If the screen data of more than one screen is to be printed, "mark" each of the
relevant screen numbers.
For details on using the mark function, see 3-5 "Screen Selection" Screen
"
(p.31).
2. Press the [F3] (Print) key.
3. Specify the output destination.
4. Specify the printing format.
S Scr Image:
Specify whether or not the screen image is to be printed as it
is.
S Col Print:
If using an NT610C, specify the method that will be used to
print color ("Imitat" means printing in monochrome with 8
grayscale levels).
S Detl Info:
Specify whether or not to print detailed information relating to
the screen.
5. Check the printer and press the
The data will be printed.
Press the [Esc] key to stop printing.
<Restrictions on data printing>
S If there is no data for an item, nothing will be printed.
S Up to 62 lines can be printed on one page.
S Up to 32 character data can be printed.
S If continuous screens or overlapping screens are printed with "No" set in the de-
tailed information printing settings, only the child screen numbers will be printed.
S If continuous screens are printed with "Yes" set in the detailed information print-
ing settings, the screen image and child screen number of the child screen speci-
fied as number one will be printed.
S If overlapping screens are printed with "Yes" set in the detailed information print-
ing settings, the screen image and child screen numbers will be printed.
key.
Section 6-1
Advertisement
Table of Contents
