Table of Contents
Advertisement
Setting Touch Switches
[NT612G, NT610C with Ver.3]
S Window keys:
Window Screen No.:
S
Type:
S
Open:
S
Close:
S
Open/Close:
S
S Control keys:
[NT20S, NT20M, NT600S, NT600M, with Ver.4 or Ver.5]
[NT30, NT30C, NT612G, NT610C]
When using an NT20S, NT20M, NT600S, or NT600M, the control keys are spe-
cified with touch switch numbers 231 to 255.
When using an NT20S, NT20M, NT600S, or NT600M with Ver.4 or Ver.5 of the
direct connection function, or an NT30, NT30C, NT612G, or NT610C, select the
numeric keys and system keys to be allocated to touch switches.
However, the last four items in the third row can only be selected when using an
NT30, NT30C, NT612G, or NT610C, and the control keys in the bottom row can
only be selected when using an NT30, NT30C, NT612G, or NT610C with Ver.3
or a later version of the direct connection function.
When one of these touch switches is pressed, the spe-
cified window is opened or closed. These keys can only
be used when using an NT30, NT30C, NT612G, or
NT610C with Ver.3 or a later version of the direct con-
nection function. (With Ver.3 they can only be used for
character-string settings.)
[NT30, NT30C, NT612G, NT610C with Ver.4]
Specify the screen number of the window to be called
here.
Specify the operation when the touch switch is pressed
here. When using Ver.3, the setting is fixed as "open".
The specified window is opened.
The open window is closed.
Any open window is closed and the specified window is
opened. If the specified window is already open, it is
closed.
Used as numeric keys and system keys in numeral set-
ting.
Section 4-7
109
Advertisement
Table of Contents
