Table of Contents
Advertisement
Marks
Functions of the Function Keys
[Cha Ref]
[Mk Ref]
[Copy]
[RCopy]
162
S Moving the screen
Pressing one of the arrow keys while holding down the [Alt] key will move the mark
displayed on the screen.
Alt
+
[F1]
. . .
Character reference
Used to display an input character in the reference area.
(1) Press the [F1] (Cha Ref) key.
(2) Input the character to be used for reference (one wide font character or a max-
imum of two normal font characters).
(3) Press the
key: the character will be displayed.
[F2]
. . .
Mark reference
Used to display an existing mark in the reference area.
(1) Press the [F2] (Mk Ref) key.
(2) Locate the cursor on the mark in the mark list window that is to be displayed.
(3) Press the
key: the character will be displayed.
[F3]
. . .
Area copy
Used to copy the dots in a specified area into the creating area.
(1) Press the [F3] (Copy) key.
(2) Specify the start point and end point of the area to be copied.
(3) Move the area to the copy destination and press the
copied.
[F4]
. . .
Copy from the reference area
Used to copy the dots in a specified area of the reference area to the creating area.
(1) Press the [F4] (RCopy) key.
(2) Specify the start point and end point of the area within the reference area that
is to be copied. Specify diagonally opposite points to specify a rectangular
area.
(3) Move the area to the copy destination within the creating area and press the
key: the dots will be copied.
Alt
+
Creating screen
Alt
+
Section 5-1
Alt
+
key: the dots will be
Advertisement
Table of Contents
