Table of Contents
Advertisement
Editing Screen Data
Procedure 1. Select "EDIT" from the initial editing menu.
Copy and Move
Procedure 1. Select "EDIT" from the initial editing menu.
Delete
Procedure 1. Select "EDIT" from the initial editing menu.
152
2. Select "Data sel" from the editing menu.
3. Locate the box cursor at the data you do not want to edit and press the [Space]
key to change the check mark
Pressing the [Home] (All) key will make all screen data types subject to editing
"
again.
4. Press the
key with the cursor on "Exec".
This is the procedure for copy and move operations. In a copy operation, the origi-
nal object remains in existence. In a move operation, it does not.
2. Select "Copy" or "Move" from the editing menu.
3. Select the object that is to be the copy source (or move source).
4. Locate the cursor at the copy destination (move destination) and press the
key.
To abort the operation, press the [Esc] key.
"
This is the procedure for deleting the object of the editing operation.
2. Select "Delete" from the editing menu.
3. Select the object of the deletion operation.
4. Check the message and then press the
To abort deletion, press the [Esc] key.
"
to
.
key.
Section 4-15
Advertisement
Table of Contents
