Table of Contents
Advertisement
Images
5-2
Images
Reference: The sizes of images that are not reduced are as follows, depending on the width
164
Image data is created in dot units and can be displayed on the screen. Marks and
symbols can be created and registered.
Images are handled in the same way as characters and marks.
Illustrations and figures can be read with an image scanner.
Images can only be used when using an NT30, NT30C, NT610G, or NT610C.
and height of the image area.
NT610G : {(width + 7)$8} x height + 558 bytes
NT30, NT30C, NT610C : [{(width + 7)$8} x height + 48] x 3 + 510 bytes
("$" indicates a division operation in which decimal fractions are discarded.)
When an image is reduced, the size will be smaller that indicated above. The re-
duction scale will differ according to the nature of the image data.
Section 5-2
Advertisement
Table of Contents
