Omron NT - SUPPORT TOOL 07-1995 Operation Manual page 77

Table of Contents

Advertisement

Initial Editing Screen and Basic Operations
Click the touch switch on the initial editing screen.
Color Specification when the NT Model Setting is "30" (NT30)
58
The NT30 has a monochrome display, but since it stores internal data in the same
form as the NT30C, a color specification window may be displayed during opera-
tion. Since when "30" is set as the NT model, the PT can be used in the same way
as other monochrome PTs provided the default color settings are used, do not
change these default settings without good reason.
If you do change the settings by mistake and wish to return to the original settings,
follow the procedure below.
S Character color and basic color for graphics, etc.
Character color, display color, basic color, boundary color, frame color, ON color,
flashing color, color when positive, color when negative.
Specify the white at the right end.
S Background color, etc.
Background color, OFF color, frame + range, frame - range
If transparentcolor isnot required,select theblack atthe leftend.
If transparent color is required, select the transparent setting.
The modification window for the specified touch
switch is displayed.
Section 4-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt-series support tool

Table of Contents