Omron NT - SUPPORT TOOL 07-1995 Operation Manual page 192

Table of Contents

Advertisement

Library Data
Reading From Existing Screen Data
Reference: Read graphics are overlapped with any graphics that are already present on the
Procedure 1. Select "READ SCR" from the library editing menu.
Displaying Library Data
Existing screen data can be read onto the library editing screen.
WARNING
The only data that can be read is fixed displays on the
specified screen.
library editing screen, leaving these existing graphics in place.
2. Locate the bar cursor on the code of the screen from which the graphic is to be
read and press the
Use the following method to display library data.
Select "Image & Lib" from the initial editing screen to allow select of library data
from the image/library selection screen (the library codes are FA20 to FAFF, FB20
to FBFF, FC20 to FCFF, and FD20 to FDFF).
For details on the procedure, see 4-11 "Inputting Image and Library Data" (p.141).
Library data can also be set for the ON and OFF codes of image/library lamps. For
details, see "Setting Image/Library Lamps" (p.102).
key.
Section 5-3
173

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt-series support tool

Table of Contents