Table of Contents
Advertisement
Common Setting Operations
Procedure 1. Locate the bar cursor at the "#" input field for the bit memory table with the re-
Reference: S Data can be copied into the next bit memory table by pressing [F2] (iCopy). See
S Setting procedure
The bit memory table has the following two functions:
S Screen switching function
S Alarm list/history function
For details on these functions, refer to the user's manual for the PT you are using.
<Setting screen switching functions>
quired number and press the SPACE (Hist/SWScreen) key.
S To register changes in bit statuses in the alarm history, also press the SPACE
key (Hist/SWScreen) in the "Hist" input field.
S [Shift] +
and [Shift] +
and next positions in the bit memory table where there is a setting in the "Bit"
column.
S Pressing the [Tab] key displays the memory table number input field.
S Pressing the [Home] (Delete) key clears the bit memory table setting at which
the bar cursor is located (applies only if there is a setting in the "Bit" column).
S An allocated bit number search will be executed each time the [F5] (Srch) key is
pressed. See "Searching Within a Memory Table" (p.78).
"Copying to the Next Input Field (Increment Copy)" (p.77).
S Allocated bits of a bit memory table can be changed in a batch with a designated
range by pressing [F4] (Btch Chng). See "Batch Changing Bits and Words"
(p.79).
2. Press the
key in the "SwScreen" input field, input the screen number of the
screen whose display is to be switched, then press the
When the screen switching function is used, the "Table", "Dsp Cl", and "Image
& Lib" settings are invalid.
3. Carry out bit setting.
For details of the setting procedure, see "Setting Words and Bits" (p.75).
can be used to move the bar cursor to the previous
Section 4-2
key again.
73
Advertisement
Table of Contents
