Table of Contents
Advertisement
Setting Touch Switches
Reference: The type of printer used (EPSON Esc/P printer (24 pin)) and the printing method
112
S Print Screen Setting:
when using an NT30C or NT610C (color, grayscale) are set using the memory
switches on the PT body (see p.28).
The following eight types of display area can be specified for touch switches. How-
ever, note that the shapes that can be used depend on the settings made for "PT
Type" and "Direct Access", as shown below:
NT20S, NT20M,
Display Area
Display Area
Normal
Solid 1
Solid 2
None
Square
Circle
Polygon
Fan
In the case of squares, circles, polygons and fans, the sensitive area (the area that
senses being touched) and display area (the area that lights, goes off, or flashes in
accordance with the status of the PC bit) can be specified separately.
Solid
Normal
(Solid 1)
Square
Circle
For details on the display of character-strings and numeric values, setting display
colors (NT30C and NT610C), setting numeral tables, and setting words and bits,
see 4-2 "Common Setting Operations" (p.61).
When a touch switch is pressed, printing of the dis-
played screen is started or suspended. This function is
only available when using an NT30, NT30C, NT612G,
or NT610C with Ver.2 or a later version of the direct con-
nection function.
NT612G
NT600S,
NT600S,
NT600M
Ver.3 or later
f
f
x
f
x
x
x
x
f: Can be used
Solid 2
None
Polygon
Fan
Section 4-7
NT30, NT30C,
NT610C
Ver.3 or later
f
f
f
f
x
f
f
f
f
f
f
f
f
f
f
f
x : Cannot be used
Sensitive area = display area
Solid line: display area
Broken line: Sensitive area
Advertisement
Table of Contents
