Table of Contents
Advertisement
Creating Graphs
122
7. Set the required display settings for the trend graph.
These settings have to be made for each broken line.
S Ref Way:
S Ref Table:
S 100% Val:
S 0% Val:
S −100% Val:
S Display %:
S Line:
S Line Col:
S % Disp Det:
S % Col Set:
Specify the method used to reference the memory
table used for the display here.
Only the "Direct" setting is valid. Do not specify the
"Indrct" setting.
Specify the number of the memory table to be refer-
enced here.
Pressing the [F1] (Lst Slct) key enables selection from
a memory table list.
Specify the reference methods for 100%, 0%, and
−100% values. If "Num Table" is specified, specify the
numeral table number.
Pressing the [F1] (Lst Slct) key while "Num Table" is
specified allows the memory table to be selected from
a displayed list.
Specify whether or not a percentage value is displayed
on the screen.
Specify the line type for the broken lines.
(Sold Lin, Brkn Lin, 1 Dot Chn, 2Dot Chn)
Specify the display color of the broken lines (NT30C,
NT610C only).
Specify the label display settings.
Display attributes and smoothing cannot be specified
with the NT20S, NT20M, NT600S, or NT600M. It is
also not possible to specify a scale of x64 when using
an NT20S or NT20M.
Specifies the character color and background color of
the "%" character (NT30C, NT610C only).
Section 4-8
Advertisement
Table of Contents
