Table of Contents
Advertisement
Creating Graphs
Setting Trend Graphs (NT30, NT30C, NT612G, or NT610C with Ver.3 or later only)
Procedure 1. Select "GRAPH" from the initial editing screen.
120
5. Press the
key with the cursor on "Exec".
6. Locate the cursor at the start point of the bar graph frame and press the
key. The bar graph will be created as a rectangular graphic. Graphics oriented
either vertically or horizontally can be created.
7. A box that indicates the size of the percentage display will be displayed.
Move this box to the required display position and press the
If "No" is set for "Display %", this box is not displayed.
8. The specified percentage display and bar graph will be displayed.
9. The screen on which registration fields for bar graphs can be selected will be
displayed.
To create another bar graph, select a field.
To quit bar graph creation, press the [Esc] key.
One trend graph frame can be created per screen, and up to 50 broken lines can
be set within this frame.
The graph menu will be displayed.
2. Select "TREND GRAPH" from the graph menu.
If there is already a trend graph, the screen for selecting the field for registration
"
is displayed. Selecting an empty field allows you to proceed to step 7.
3. Locate the cursor at the start point for the trend graph frame and press the
key.
Trend graphs are created as rectangular graphics. They can be oriented ei-
ther vertically or horizontally.
4. Locate the cursor at the end point of the trend graph frame and press the
key.
Section 4-8
key.
Advertisement
Table of Contents
