Table of Contents
Advertisement
Creating Graphs
4-8
Creating Graphs
This section describes how to create graphs whose display corresponds to the nu-
meric values in numeral memory tables. There are the following three types of
graph.
When using an NT20S, NT20M, NT600S, NT600M, or NT612G, only bar graphs
can be used.
S Bar graph:
S Trend graph:
1000
0
S Broken line graph:
1000
0
0
1
2
3
Numeral table
Numeral table contents are displayed in the form of a
bar graph.
43%
Numeral table contents that change with time are dis-
played in the form of broken lines.
Trend graphs can only be used when using an NT30,
NT30C, NT612G or NT610C with Ver.3 or a later ver-
sion of the direct connection function.
: Numeral table 1 84%
: Numeral table 2 21%
Time
The contents of several consecutive numeral tables are
displayed in the form of a broken line. The display inter-
vals can be changed without restriction.
Broken line graphs can only be used when using an
NT30, NT30C, NT612G or NT610C with Ver.3 or a later
version of the direct connection function. If using Ver.3
or later, the display intervals can be changed without re-
striction.
1000
0
4
5
0
(After changing the interval)
Section 4-8
1
2
3 4
5
Numeral table
117
Advertisement
Table of Contents
