Table of Contents
Advertisement
Creating Graphs
5. Set the basic settings for the trend graph as required.
S Type:
S Dw Width:
S Sampling Cycl:
S Mv Direct:
S Details
S Frame:
S Dsp Sing:
S Color:
6. Press the
key with the cursor on "Exec".
Specify the type of trend graph.
Normal:
The graph remains in a fixed position and
successive points in the graph are drawn
in the "Mv Direction".
Pen Reco: The latest point is always drawn at a fixed
position and the entire graph moves in the
"Mv Direction".
Specify the direction in which the broken line moves
with time here.
Specify the cycle in which the graph is rewritten in 0.1
second units (range: 1 to 65535 = 0.1 to 6553.5 se-
conds)
Specify the direction in which the broken lines move
with time.
Specify whether or not a graph frame is displayed.
If "No" is specified here only the broken lines within the
graph are displayed.
Specify whether or not a minus sign is to be displayed
in the case of negative values here. If "Yes" is speci-
fied, the center of the graph area is displayed at the ori-
gin to allow the display of negative values.
Specify the graph's frame color, the color of the positive
area inside the frame, and the color of the negative
area inside the frame (NT30C, NT610C only).
Section 4-8
121
Advertisement
Table of Contents
