Table of Contents
Advertisement
Creating Graphs
124
5. Set the basic settings for the broken line graph as required.
S Mv Direct:
S Detail Info
S Frame:
S Disp Sign:
S Color:
6. Press the
key with the cursor on "Exec".
7. Set the required display settings for the broken line graph.
These settings have to be made for each broken line.
Specify the direction in which the broken line is to be
drawn in accordance with the ascending order of
memory table numbers here.
Specify whether or not a graph frame is displayed.
If "No" is specified here only the broken lines within the
graph are displayed.
Specify whether or not a minus sign is to be displayed
in the case of negative values here. If "Yes" is speci-
fied, the center of the graph area is displayed at the ori-
gin to allow the display of negative values.
Specify the graph's frame color, the color of the positive
area inside the frame, and the color of the negative
area inside the frame (NT30C, NT610C only).
Section 4-8
Advertisement
Table of Contents
