Table of Contents
Advertisement
Functions
14.8 Inputs/outputs
14.8.5
Digital outputs
Overview
A digital output reports signal states of the converter to the outside, e.g. a fault or an alarm. The
function of a digital output is adjustable.
Description of function
Figure 14-45
A binary signal sink r073x is assigned to each digital output.
The interconnection of the binary signal sink with a binary signal source determines the
function of the digital output.
Parameter p0748 inverts the signal of the digital output.
Parameters
The following list contains the parameters of the "Functions of digital outputs" function.
Number
r0729.0...2
c0730
c0731
c0732
r0747.0...2
434
Binary signal sinks of the digital outputs
Name
Digital outputs access authority
Signal for terminal DO 0
Signal for terminal DO 1
Signal for terminal DO 2
Digital outputs status
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Unit
SINAMICS G220 converter
Advertisement
Table of Contents
