Overview Of The Guided Quick Startup - Siemens SINAMICS G220 Operating Instructions Manual

Commissioning (Startdrive)
11.4 Overview of the guided quick startup
11.4

Overview of the guided quick startup

Overview
The guided quick startup is a drive commissioning wizard. You can use the wizard to make the
basic settings for the drive. It preassigns drive settings for the intended application.
Requirement
You need the following Engineering rights to run the guided quick startup if project protection
is activated:
• Edit hardware configuration
• Edit drive applications
Description of function
①
Make detailed settings for the active quick startup area
②
Active quick startup area (highlighted)
③
Icons: store data in a power-independent manner, restore factory setting (each in online mode)
④
Select active data sets (CDS, DDS)
⑤
Icons: Start editing/Finish editing
⑥
Icons: one step forward or back
Figure 11-1 Example: Guided quick startup in offline mode
288
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter