Diagnostics Buffer - Siemens SINAMICS G220 Operating Instructions Manual

Commissioning (web server)
10.5 Functions and menus
Selecting messages
Search
Filter by date
Message types
Displaying messages
Type
Incoming
Class
Message
Gone
10.5.3.2

Diagnostics buffer

Overview
Function view "Diagnostics buffer" provides information about all system-relevant operations,
e.g. commissioning, new ramp-up, generation of a certificate.
240
Enter a keyword
Select a date or time interval
Select the message type that should be displayed:
• All
• Faults
• Alarms
Displaying the message type:
• Alarm
• Fault
Time that the message was received
Assign the message to a message class according to PROFIdrive
The message number is output on all operating units, e.g. PC or SIMATIC
HMI.
Specification of the message number with message text
Time when the message went
• Faults are given the status "Outgoing" if the following are true:
– The causes have been eliminated.
– The message has been acknowledged.
Selection for more information:
• Description of the message with cause and remedy
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter