Operation and monitoring with SINAMICS SDI Standard
13.5 Functions
13.5.3.3
Change the direction of rotation of the motor shaft
Overview
You change the motor direction of rotation in menu "Operation and monitoring" > "Rotation
direction".
Procedure
Figure 13-7
Proceed as follows to change the direction of rotation of the motor:
1. In the navigation bar, navigate to the "Operation and monitoring" menu.
Confirm the selection using the "OK" key.
2. Select the "Direction of rotation" menu item.
Confirm the selection using the "OK" key.
3. Select the direction of rotation for the motor:
– Right
– Left
13.5.4
"System" menu
13.5.4.1
Saving the changes in the converter
Overview
In menu "System" > menu item "Settings" >"Web server", specify whether you wish to
automatically save changes in the converter.
312
Changing the direction of rotation of the motor
OR
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter