Table of Contents
Advertisement
Functions
14.9 Setpoint channel
14.9
Setpoint channel
14.9.1
Main setpoint
Overview
The main setpoint specifies the speed of the motor.
Description of function
The converter receives its main setpoint via one of the following setpoint sources:
• Fieldbus interface of the converter
• Analog input of the converter
• Motorized potentiometer emulated in the converter
• Fixed setpoints stored in the converter
• Measuring probe: The converter converts a sequence of pulse signals at the digital input to
an analog value.
Figure 14-47
436
Setpoint sources of the converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter
Advertisement
Table of Contents
