Data Sets; Switching Between Different Drive Configurations - Siemens SINAMICS G220 Operating Instructions Manual

Functions
14.11 Drive functions
14.11.5

Data sets

14.11.5.1

Switching between different drive configurations

Overview
A drive configuration may require different converter settings, depending on the application.
The settings are stored in drive data sets.
Description of function
Figure 14-174
The parameters for drive configurations are indexed. A setting of the function can be stored
for each index. One of the four indices can be selected using control commands.
The settings in the converter with the same index are called a drive data set (DDS). The
converter can switch between the different drive data sets .
580
Configuration settings with drive data sets
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter