Control Commands For Energy-Saving Mode - Siemens SINAMICS G220 Operating Instructions Manual

Functions
14.4 PROFINET communication
14.4.10.4

Control commands for energy-saving mode

Overview
The converter switches to energy-saving mode or back to normal operation, depending on the
control command.
Description of function
The following table contains the control commands for energy-saving mode.
Table 14-15
Command
Start_Pause
Start_Pause_with_time_re‐
sponse
End_Pause
380
Control commands energy-saving mode
Explanation
Switches to energy-saving mode depending on the pause duration
Switches to energy-saving mode depending on the pause duration
and also specifies the transition times in the command response
Switches from energy-saving mode to normal operation
Cancels switching from normal operation to energy-saving mode
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter