Table of Contents
Advertisement
Commissioning (web server)
10.5 Functions and menus
10.5.4.2
User-defined parameter list
Overview
A user-defined parameter list is a combination of specific parameters from the standard
parameter list of the converter. These can be used to configure frequently used user functions,
for example.
Description of function
With the user-defined parameter lists, the web server provides the following functions:
• Creating up to 20 user-defined parameter lists
• Configuring list properties
– Name
– Position or sequence of the tabs
– Comment
– Delete list
• Exporting and importing user-defined parameter lists
Export:
– Export one or several user-defined parameter lists.
– The web server exports the lists exclusively as a json file.
– Export files generated by the web server can be imported into a Startdrive project.
Import:
– The list import function in the web server exclusively imports json files.
– User-defined parameter lists exported via the web server or Startdrive as a json file can be
If values are changed, the data must be saved retentively.
10.5.4.3
Signal interconnections
Overview
The function view provides an overview of the converter signal interconnections (signal source
and signal sink).
Signal interconnections can be added, modified and/or reset to factory settings.
250
imported into another drive of the same type via the web server.
Requirement: same drive type and same firmware version
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
SINAMICS G220 converter
Advertisement
Table of Contents
