I/O Presetting "Fieldbus With Data Set Switchover - Siemens SINAMICS G220 Operating Instructions Manual

c0840[0...n]
p1001[0...n]
p1002[0...n]
p1003[0...n]
p1004[0...n]
p1016
c1020[0...n]
c1021[0...n]
c1022[0...n]
c1023[0...n]
r1024
c1070[0...n]
c2103[0...n]
14.8.1.2

I/O presetting "Fieldbus with data set switchover"

Overview
In order to avoid having to successively change terminal by terminal, multiple terminals can be
set jointly with one operating unit.
With the I/O preset "Fieldbus with data set switchover", the converter is prepared for
operation on the fieldbus.
Requirement
The preset can only be changed using the Startdrive commissioning tool or the web server.
The preset is only useful if a fieldbus telegram has been configured.
Description
The I/O preset "Fieldbus with data set switchover" is the factory setting of the converter with
PROFINET interface.
The converter obtains its signals via the fieldbus. With 1 signal at digital input DI 3, the motor
can be traversed via the digital inputs DI 0 and DI 1.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
ON / OFF (OFF1)
Fixed speed setpoint 1
Fixed speed setpoint 2
Fixed speed setpoint 3
Fixed speed setpoint 4
Fixed speed setpoint select mode
Fixed speed setpoint selection bit 0
Fixed speed setpoint selection bit 1
Fixed speed setpoint selection bit 2
Fixed speed setpoint selection bit 3
Fixed speed setpoint effective
Main setpoint
1st acknowledge faults
Functions
14.8 Inputs/outputs
[rpm]
[rpm]
[rpm]
[rpm]
[rpm]
419