Table of Contents
Advertisement
You change the language setting in menu "System" > menu item "Settings" > "Language".
Procedure
To change the language setting, proceed as follows:
1. In the navigation bar, navigate to the "System" menu.
Confirm the selection using the "OK" key.
The "System" menu opens.
2. Select the "Settings" menu item.
Confirm the selection using the "OK" key.
3. Select the "Language" menu item.
Confirm the selection using the "OK" key.
4. Select the language required.
Confirm the selection using the "OK" key.
13.5.5
"Support" menu
13.5.5.1
Scanning the IP address
Overview
The IP address of the converter is displayed in menu "Support" > "Scan IP address", and also
available via a QR code.
You can connect to the converter web server using the IP address.
You have the following options depending on the operating unit:
• Scanning the QR code of the IP address using a mobile device
• Manually entering the IP address, e.g. at a computer, laptop
Requirement
• You have connected the mobile device to the drive via the WLAN or via a USB OTG (on-the-go)
adapter.
• You have connected the computer/laptop to service interface X127 or PROFINET interface
X150 via cable.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
Operation and monitoring with SINAMICS SDI Standard
13.5 Functions
317
Advertisement
Table of Contents
