Xerox 721 Message Manual page 111

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS1823 Problem with file ----> file-name. SDI aborted.
The specified form file does not exist or is in an unknown format.
The system diagnostics interface (SDI) operation has been
aborted.
or
OS1823 Problem with file ----> filename.TPJ aborted.
The specified form file does not exist or is in an unknown format.
The diagnostic print program has aborted.
Action Modify the diagnostic print request.
OS1824 Duplex not allowed in this configuration. SDI aborted.
The system is not configured for the requested duplex diagnostic
print job. The system diagnostics interface (SDI) operation has
been aborted.
or
OS1824 Duplex not allowed in this configuration. TPJ aborted
An invalid diagnostic print request has been generated.
Action Respecify as simplex and retry.
OS1825 Job queue has been flushed
The DRAIN command was entered. All data in queue has
printed.
Action None.
OS1830 Printing 1 copy of current report
The "PRINT 1" option was selected in response to "Disk
saturation" message OS6300 or OS2871. Multiple-copy printing
of the current report has discontinued and the system is printing
one copy.
Action None.
OS1835 Printing all copies of report in sections
The CONTINUE I command was entered in response to "Disk
saturation" message OS6300. The system is continuing multiple-
copy printing of current job by sections.
Action None.
OS1840 Printing all copies of report so far, ending job now
The ENDJOB command was entered in response to "disk
saturation" message OS6300. The system is printing the current
report copy and will stop printing the job when that copy is
completed.
Action None.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-35